The Well
Planned Home
Menu

Epoxy Flooring Quantity Calculator

Count whole coating kits from net floor area, coat count and the coverage of the mixed kit you are buying.

Your measurements

Editable example

Use the unit on each label. You can also type feet and inches with ft and in, or the marks on your tape measure.

Floor area 1
Package sizes, prices and materials

Example: replace these measurements

Your material list

2 epoxy kits

120 sq ft measured

Shopping list & save options
Net floor area
120 sq ft
Coated area with allowance
264 sq ft
Primer kits, one coat
Enter primer coverage
Topcoat kits, one coat
Enter topcoat coverage
Epoxy subtotal
Enter your unit price
Area 1
120 sq ft

Length 12 ftWidth 10 ft
Schematic of the measured area. Use the dimensions shown, not the drawing scale.

The calculation

  1. 120 × 2 × (1 + 10/100) ÷ 250, rounded up = 2 kits

Before ordering, use the flooring cartons, layout & waste planning guide to check the inputs and take the right questions to the supplier. Choose another calculator.

How to plan the quantity

Add the uncovered areas only once. Multiply net area by coats, then apply your allowance and divide by the coverage of one complete mixed kit.

Keep primer and topcoat separate because their coverage and coat requirements can differ. This worksheet counts one coat of each when its coverage is entered.

A mixed kit is the unit being purchased. Never change a component mixing ratio to make a partial kit fit an area result.

Before you order

  • This does not select a coating, preparation method, mixing ratio, application time or chemical-safety procedure.
  • Use coverage for your actual surface and specified thickness; a generic square-foot rate does not establish adhesion or suitability.